Easy to install if you can use a sawzal and a welder adds alittle sound need alittle more time to see mpg gains or real performance but I did notice a performance gain in the higher rpm

Fit a little bit loss but worked out fine , welded it on. .

Fit perfectly and went in easily. Would highly recommend.

As far as the product goes, it is what you'd expect from a simple section of aluminized steel. However, my beat up old stock exhaust made it a real PITA to get the pipe to seal worth a dang. I ended up having to cut slits in both ends of the delete pipe to get it to crush down and seal half way decent. I even got an exhaust pipe expander inside of it which helped a lot but it still wouldn't go back to perfectly round. In all honesty, I really wish I would have just been patient and waited to do this since I just turned around and bought a 4" SS turbo-back kit like 3 months later and ended up just giving the delete pipe away to a buddy. RiffRaff was top notch as always, fast shipping and good packaging, A+.

The delete pipe is a perfect fit. I'll definitely buy another one if I pick up another 7.3.

Delete pipe fit great clamps I ordered sealed the exhaust until I could weld it .

fitment was good, it was relatively easy to slide on, but the stock pipe had a bend in it from the factory that required this pipe to be bent to fit the existing pipe. I had it welded to make sure it had the best seal, since no band clamp would seal very well afterwards.

Went on easy after some hammer work, the ends were beat up when i received it

Perfect fit. Cut next to the welds on the stock muffler and be prepared to weld back in place. Don’t waste money on the clamps they will not tighten down to hold it in place even if you cut a slice on the pipe to allow room for it to squeeze together.