Parker 60VLV-4 Viton Sleeves (1/4 inch)
These 1/4" fuel sleeve seals fit the steel fuel injection lines that connect the fuel lines to the cylinder fuel rails. One seal is required at each fuel rail fitting so 1 package of 2 seals is all that is requied for the engine.
On the 99-03 7.3's, the fuel rail fitting on the passenger's side is a common place to find a fuel leak and will run down the rear of the block and drip on the starter motor. With the 94.5 to 97 engines, both fuel rail connections are at the rear of the cylinder heads and can be problematic.
Model Year 94-03 7.3L diesel.
Color: Black
Genuine Parker Vibra-Lok sleeve
Order of 1 is a set of 2 sleeves.
61 Reviews Hide Reviews Show Reviews
-
A must-have when servicing fuel lines
These are used on the rear connections of the hardline fuel lines that attach at the back of the heads. After 260,000+ miles, the ones that came out were virtually destroyed. These were just the ticket; the right size diameter and length. Install carefully to not damage them and tighten as specified. This was as lot easier than trying to guess the right rubber hose size and trying to trim to fit. Riffraff to the rescue and saved me a lot of time.
-
1/4 file line sleeves
Great product went right on super fast shipping
-
good parts
easy install, no leaks.
-
Viton sleeves
Perfect.
-
Need these
If you start undoing fuel lines make sure to replace your seals. These trucks are getting old so replacing these is important if you work on them.
-
7.3 rear cylinder head fuel line sealing sleeves
Perfect fit!
-
Parts
I have not install them yet. I will be glad to review all of them as soon as I have time to install them.
-
Sleeves
Worked great
-
Fuel line sleeves
Thanks for the great service and product. I have relied on Riffraff many times and you guys have never let me down.
