34 o-rings and 6 Parker fuel sleeves!

We have put together this kit that every owner of a 99.5-03 7.3L should keep in their toolbox. Eventually, the 7.3 will develop a fuel or oil leak. It's one of those "not if but when" scenarios with the 7.3. Rather than having to run around town or hope the dealer has the parts you need without having to pay a fortune for their parts while your truck is down, be prepared and have the parts on hand. Don't worry about the o-rings drying out or cracking, The shelf-life of DuPont Viton is indefinite, they won't go bad from air, heat, sunshine or time.

What this kit includes: 
◦A full set of Turbo pedestal (4) o-rings, both upper and lower 
◦GTP38 turbo outlet o-ring 
◦HPOP outlet fittings (4) o-rings, both internal and external 
◦HPOP rear plug o-ring 
◦HPOP reservoir fill plug o-ring 
◦IPR to HPOP body o-ring 
◦Head oil rail o-rings (8) for oil rail plugs, ICP or cross-over line 
◦HPOP Hose to head internal o-rings (2) 
◦Loctite 608 retaining compound (2 - .5ml packets for HPOP and oil rail) 
◦GTP38 EBPV solenoid o-rings (2) 
◦GTP38 EBPV piston backplate o-ring 
◦New Garrett EBPV pushrod clip 
◦Fuel Drain Valve core o-rings (2) Florosilicone 
◦Fuel Drain Valve Stem o-ring (1) 
◦Fuel Filter Check Valve o-rings (2) 
◦Fuel Bowl Heater/water in fuel sensor o-rings (2) 
◦Fuel Bowl plug o-rings (2) 
◦Fuel Bowl return regulator o-ring 
◦Sleeve gaskets for the fuel rail lines, both ends (4) 
◦Sleeve gasket for the fuel return line 
◦Sleeve gasket for the main fuel feed line 
◦Turbo mounting bolts (2) 
◦O-ring size identification and location charts 
◦Downloadable HPOP outlet repair instruction sheet 
◦Downloadable Fuel Bowl repair instruction sheet