Intercooler boot complete clamp kit for Ford 03-07 6.0L Powerstroke.
Includes:
Hot Side: 2 - 2.75", 1 - 3.25", 1 - 3.5"
Cold Side: 4 - 3.25"
*NOTE: Not recommended for stock CAC boots as they are much thinner than aftermarket.
35 Reviews Hide Reviews Show Reviews
-
Nice clamps
Good replacement clamps. Would like to have the torque values with some instructions when using their CAC tubes. The thicker material probably means less torque needed for the clamps?
-
Great Clamps
My truck makes about 40 pounds of boost and I had cheap clamps on the boots for a while. I could tell the difference in quality as soon as I opened the box. I understand it's just a clamp but its nice to have the confidence in them. No one wants to be on the side of the road putting a boot back on.
-
Inner boot clamps
Good dependable parts
-
CAC intercooler boot clamps
great clamps! I'm running 900+ hp and had an emergency during install so I didn't get a chance to torque them to specs and and they still held on full throttle getting on freeway with out any problem.
-
6.o boot clamps
very good and heavy duty
-
Great clamps
Came with all of then for the install. Slightly wider than stock and robust. Fit the boots great and an improvement over the stock clamps.
-
Clamp Torque
When tightening to Riff Raff specified torques. some of the nuts appeared to tighten down on to the non-threaded portion of the assembly. Believe I carefully selected the correct clamp for the correct location. Also the clamps did not appear any better than the OEM. Time will tell if they hold up, the CAC boots did look like a improvement, again time will tell.
-
Work well
These are good clamps that work well
-
Turbo boot clamps
Received the clamps quick, sizes were perfect. Quality is as good or better than OEM. Very pleased!