Sweet piece. Was a bit skeptical but actually super nicely made and way better than stock.

Easy to install and looks good

This is a great item that prevents needing to clean and re-apply RTV (and wait overnight for it to cure) every time you need to access your HPOP drive gear bolt to reinstall your HPOP. I used it with the stock plate on top for the EBP sensor. My only complaint is that the two M6x1.0 bolts that come with the piece are too short. They are the same length as the stock bolts, but the piece adds ~3/8" thickness to the assembly which results in 3/8" less thread engagement. This caused my threads on the front cover to strip out and need to be drilled out and replaced with helicoils. If you purchase this and the bolts are the same length as the stock bolts, I recommend using longer bolts to prevent this problem and tighten them just snug to compress the new o-ring (disregard stock torque spec).

Working great