Fuel Rail Crossover™ (FRx)

Part Number:
FRx

Manufacturer:

$209.13
$209.13
$197.88
(You save $11.25 )

7.3L Diesel Fuel Rail Crossover™ (FRx) 99-03 Powerstroke

"The Prescription For Your Fuel System Needs®"

Our 2nd Generation FRx™ System utilizes Eaton Aeroquip® 304 Stainless Steel Braided lines covered with a groundbreaking protective layer of HYTREL® from DuPont.

The FRx™ was made to solve the 'deadhead' fuel rail issue on the 99-03 Powerstroke engine by connecting the two heads and allowing a metered return you allow the air another return path, rather than forcing it through your injectors. This product was designed to eliminate the need to cut your return line and use compression fittings, so that it is a true bolt on system. We have also machined the FRx™ block to provide from stock to 72 psi of fuel pressure depending on which spring you choose to install it with. By using our kit and eliminating the air in the fuel system you can experience smoother, quieter idle, less cackle, and better throttle response among other things. You will also be increasing your injector life as well by utilizing the FRx™ and creating a regulated return back to the tank. Protective covers are also pre-installed to prevent chaffing of engine components from the SS braided line. These covers are also great if you want to keep the system looking OE and not draw attention to it once installed.

Included:                                                                                        Techical Info:
- FRx™ System                                                                               - Exceeds SAE 100R14A
- 3 Springs for adjusting Fuel Pressure                                              - Rated for commercially produced B100
- Viton O-ring                                                                                  - Temperature Rated -100˚F to +450˚F
- Parker® Fuel Sleeve                                                                      - Max. Working Pressure 3000 psi
- 2 Stainless mounting bolts                                                             - Minimum Burst Pressure 12000 psi
- Custom 9/32" socket

Fuel pressure spring settings 
55-60 psi  silver spring
61-65 psi  gold spring *Recommended 
66-72 psi  black spring

Riffraff Diesel Performance is committed to 100% Made in the USA. All materials are from USA resources. Every machining step is performed in the USA. Every component is assembled in the USA.

install.jpg

1999-2003 7.3L Powerstroke with stock fuel bowl
Write a Review

399 Reviews Hide Reviews Show Reviews

  • 4
    Frx fuel rail crossover

    Posted by D.Swafford on Feb 6th 2022

    Works as advertised. I really haven't noticed any reduction in associated injector noise. The truck does run better since installing two new injectors.


  • 4
    fuel rail crossover

    Posted by Unknown on Feb 3rd 2022

    the line for driver side would work a lot better if it was about 1" longer for the bigger turbo mecks its kinda tight going over or under that to mound on back driver side of the motor. other then that 1 little issue it works great

  • 5
    Fuel Rail Crossover

    Posted by Robert on Feb 3rd 2022

    this is terrific upgrade to my 7.3 eliminated a typical hard start after fuel rail bleed down, fit perfectly, very happy with this upgrade, the engineering that RiffRaff is providing to our community is stellar, of the highest quality materials and fit and finish, There is no better, Highly recommend to all, Clay was a real pleasure to work with, always willing to help and educate the rest of us, the inner workings of their offerings, You won't regret taking advantage of their products

  • 4
    FRx

    Posted by Jake on Dec 7th 2021

    Fits pretty well. You will have to grind a little on the baby’s butt of the uppipe collector if you have an e99. Fuel pressure improved 4 psi from stock regulator with black spring. Truck runs a little smoother and the idle sounds better. Instructions one where to route hoses could be a little more clear but it is still a great kit.

  • 5
    FRx Install

    Posted by Jeff Kimak on Dec 2nd 2021

    If you installed an FRx kit clap your hands.
    If you DIDN’T drop a fitting clap your hands.
    If you DID drop a fitting and you don’t know where it’s sitting then I know you are not shitting………
    Clap your hands……

  • 5
    Great product!

    Posted by Landon McCracken on Nov 25th 2021

    Installed it on my 2002 F350 and immediately noticed better response and noise reduction.

  • 5
    FRx is Great!

    Posted by Jentry on Nov 1st 2021

    I installed on my '00 Excursion a few weeks ago and have since put ~1500 miles on the truck. Half of those miles were pulling a 9000lb camper, and the FRx (+HPx) made the truck much more enjoyable. All the cackling and sharp noises are gone, throttle response is better, and fuel mileage improved (~1gpm). Even the whooshing noises I had from the waste gate are gone, which is one less thing to listen to when driving. These additions complement a 75hp tune and high flow filter.

    Now I can hear my wife and five kids so much better! Thanks, Riff Raff!

  • 5
    Quality System

    Posted by Brayden on Oct 26th 2021

    First off I have to complement Riffraff on thier customer service. I hadn't even purchased the product and they were happy to take the time to answer my questions and walk through the install with me. Shipping was fast, and installed wasn't really too difficult with the detailed instructions. I really notice a difference how fast my Excursion starts now, not to mention how much quieter it is at idle and when cruising on the road.

  • 5
    Fuel Cross Over

    Posted by Leander, TX on Oct 7th 2021

    Works great, fast shipping