A little expensive but won't wear out like the OEM will.

Great quality part, but a bitch to install. I have a Snap on remover which worked great, and a Blue Point (Snap-On sister company) installer. What makes this install difficult is the pulley is already mounted to the balancer. Most by this same brand are not. I had to use several washers to space out the thrust nut from hitting the pulley. I didn't want to remove the pulley due to the fact an impact gun wouldn't budge the first Allan bolt I hit. I also didn't want to void the warranty if I did separate the two after it didn't easily come apart. (I don't know if it would void the warranty, but didn't want to take the chance.) Any how, you will need a bunch of spacers with an installer if you don't have a longer bolt, or skinny washer for install.

Notany miles post installation. However, the truck appears to be smoother. Front rubber o-ring was starting to pucker out on OEM unit. I was replacing my LPOP with a Melling so now was a good time for the damper. Clay is good as the damper arrived via UPS just as I was finishing the LPOP. Time will tell if it was worth the cost.

Great product well built backed by great service from Clay

Completely smoothed out my engine especially at idle.