Complete CAC Intercooler Boot Kit Ford 7.3L Powerstroke 99-03
This complete kit consists of 6 pieces of 4-ply Aramid reinforced silicone hoses that are specially made for Riffraff Diesel to withstand extreme temperatures to approximately 500 degrees F (vs. standard couplers that are good to 350 degrees F) and have been tested up to 150 psi working pressure.
Available in Blue, Red, and Black.
You will need to measure the inlet and outlet size of your intercooler to know what you have. We do not make a universal boot that fit both because fitment should be snug. Your metal intercooler tubes are 3" on all years so you don't even need a tape measure, just take off the boot, flip it around and see if it will fit on the inlet/outlet of the intercooler. If you need help with sizing please give us a call to ensure you get what you need.
We offer Early 99 plenum boots as well. These can be identified by the small 2" plenum inlet where the 99.5-03 have a 3" plenum intake and the truck production date would be 12/7/98 or before. If you need help with sizing please give us a call to ensure you get what you need. We also offer clamp kits if you are still running your stock Ford clamps.
Riffraff CAC / Intercooler Boot Measuring
306 Reviews Hide Reviews Show Reviews
-
Great product
I replaced my boots after my stock ones failed. great product easy to install and looks great!
-
Buy These Now!
I replaced my boots after pulling the turbo to replace the pedestal o-rings. Great product, easy to install. I would recommend getting the Plenum Reinforcing Inserts too, as well as the High Pressure Crossover.
-
Great upgrade to OEM
Thicker boots and much stiffer than the OEMs. Much better seal than the OEM along saving you a lot of money over the OEM boots.
-
Nice product
They are great boots but getting them on and clamped perfectly is challenging. They do the job and look good. I'm very pleased.
-
WOW
You can't possibly appreciate these until you hold them in your hand next to the stock CAC boots, these are at least 3 times thicker, they are a pain in the a** to put on, but, I wouldn't have it any other way. Very happ
-
Quality Product
Made in America , Better than OEM , Quality Product . I had to trim the spider boot on the hot side & make sure you re-torque the clamps after some run time , the color choice is a plus !
-
Great Quality
Easy install, awesome quality!
-
03 intercooler boot kit
Boots to long. Goes over existing mounting places. Looks good, but will see how it works overtime.
-
Much better then oem
Nice boots. Much heavier then stock. Definitely a tight fit on the upper cac pipes to spider. A hook tool and an extra set of hands made this part much easier. I got back a couple pounds of boost I had lost with my old leaky boots and the truck runs much smoother. Great parts!
